Carbon for the RS6 and RS7 C8.
Technically the same car with a different roof. Everything in front of the A-pillar fits both; at the rear it differs, and that's noted on the product.
The RS6 Avant and the RS7 Sportback are technically the same car with a different roof. For carbon fiber that means: everything ahead of the A-pillar fits both, and toward the rear they diverge. RevoZport follows that in its program. The product names tell you exactly what a part is intended for, and where it says "RS6 / RS7" it fits both.
Shared between RS6 and RS7
These parts fit both body styles.
- RevoZport Carbon Canards for Audi RS6 / RS7 C8
- RevoZport Carbon Front Splitter for Audi RS6 / RS7 C8
- RevoZport Carbon Grille for Audi RS6 / RS7 C8
RS6 only
Specific to the Avant.
- RevoZport Carbon Diffuser for Audi RS6 C8
- RevoZport Carbon Hood for Audi RS6 C8
- RevoZport Carbon Side Skirts for Audi RS6 C8
- RevoZport Carbon Spoiler for Audi RS6 C8
RS7 only
Specific to the Sportback.
- RevoZport Carbon Diffuser for Audi RS7 C8
- RevoZport Carbon Hood for Audi RS7 C8
- RevoZport Carbon Side Skirts for Audi RS7 C8
- RevoZport Carbon Spoiler for Audi RS7 C8
The complete set
If you would rather not put it together piece by piece, there is the complete widebody kit. It contains the parts that were designed together, so the lines run through from front to rear. This is the biggest job and the biggest investment; the product page lists exactly what is in the set.
Will it fit my car?
Rule of thumb: grille, canards and front splitter are shared between RS6 and RS7. Side skirts, diffuser and spoiler are model-specific, because the rear end and the sill line differ. If in doubt, check the product name or use the license plate or car selector on the site; it filters directly by your version.
Delivery: sea freight or air express
RevoZport makes every part to order in Taiwan. For the bigger jobs, you choose how it gets here. Sea freight takes roughly eight to ten weeks and is the sharpest price. Air express arrives in two to three weeks, but air freight for a large carbon fiber part simply costs considerably more. You see both options with their price on the product page itself, so you can weigh up what you want per part. Smaller parts ship by air express as standard, because the difference there is only a few tens of euros.
Installation in Elburg
Carbon fiber does not fit itself. RevoZport's fitment is good, but aligning, degreasing and bonding demand precision, and a misplaced part is something you will see for the rest of your life. We have our own workshop in Elburg. Check the installation service on the product page and we will contact you after your order to schedule an appointment. You are also welcome if you bought the part somewhere else.
Frequently asked questions
Which parts fit both the RS6 and the RS7?
Grille, canards and front splitter are shared between both models, because the front end is the same. Side skirts, diffuser and spoiler are model-specific, because the sill line and the rear end differ. If the product name says 'RS6 / RS7', it fits both.
Do these parts fit a regular A6 or A7?
No. The RS versions have different bumpers and wider body parts than the A6 and A7. These parts are made for the RS6 and RS7 C8. Check your version with the license plate lookup.
Is the RS6 Avant the same as the RS7 Sportback?
Technically they are the same car with a different roof and a different rear end. That is why everything ahead of the A-pillar is interchangeable and toward the rear they diverge.
What material are the parts made of?
RevoZport works with prepreg dry carbon: fabric with a pre-measured amount of resin that cures under pressure and heat. That gives a higher fiber-to-resin ratio than hand-laid wet carbon, so lighter at the same strength and a tighter surface.
Can you install it?
Yes. We install carbon fiber in our own workshop in Elburg, even if you bought the part somewhere else. Check the installation service on the product page and we will contact you to schedule an appointment.
View all parts per version: RS6 C8 or RS7 C8 or go to the complete RevoZport program.
For the RS6 C8.
All parts for the C8 →
For the RS7 C8.
All parts for the RS7 →
Have us install it.
Order it separately or have us install it in Elburg. Usually ready within half a day, with a two-year warranty on the installation. Combine the appointment with detailing and your new parts get a ceramic coating right away.
Not sure about the fitment?
WhatsApp your license plate and a few photos of your car. We'll check which parts fit and what installation involves.
Uiterwaardenstraat 30
8081 HJ Elburg
0525-796515 · info@dynoforce.nl
Open by appointment, Mon to Sat