Hand met een BMW MDG1-motorcomputer bij een open motorkap, met de tekst DME Unlock 2020+
ECU Tuning

DME Unlock BMW & MINI (Send In ECU).

Shop

€600,00 incl. VAT
By appointment in Elburg, we schedule a time that works for you
✓Carried out at our own workshop in Elburg
✓Two-year warranty on the work
After your order, we'll contact you to schedule a time that works for you.
About this service

What we do.

Does your BMW or MINI have a Bosch MG1CS003, an MD1CP002, or a DME9 (MG1CS221)? Then we can't unlock the engine computer in Elburg. For those cars, we remove the DME and ship it out. After that, your car is tunable through the OBD port with bootmod3, MHD, and other common platforms.

Since August 2026, we can unlock most locked BMW and MINI engine computers ourselves, including those from after June 2020. For three control units, that's not yet possible: the Bosch MG1CS003, the MD1CP002, and the DME9 (MG1CS221) from the new S68 engines. Those need to go to the manufacturer of our tool.

Got something else in your car? Then you're cheaper and faster off with the bench unlock, which we perform while you wait.

Which option do you choose?

  • Bosch MG1CS003 or MD1CP002, one ECU. The four- and six-cylinders. Which control unit is in your car depends on model and production date; we check that before we start.
  • DME9 (Bosch MG1CS221), two ECUs. The 4.4 V8 S68. That engine always has two engine computers, and the price covers both.

These models always have a DME9

  • M5 G90 and G99 (2024 and newer)
  • XM G09 (2022 and newer), including the Red Label
  • X5 G05 and X5M F95 from the 2023 facelift: M60i and X5M Competition
  • X6 G06 and X6M F96 from the 2023 facelift: M60i and X6M Competition
  • X7 G07 from the 2023 facelift: M60i
  • 7 Series G70 (2023 and newer): 760i and M60i
  • Alpina XB7

For these models, it depends on the car

Among others, the 3 Series G20/G21, 4 Series G22/G23/G26, 5 Series G30/G31, 6 Series GT G32, 7 Series G11/G12, 8 Series G14/G15/G16, X3 G01, X4 G02, X5 G05, X7 G07, Z4 G29, 2 Series G42, and X1 U11 sometimes have an MG1CS003 and sometimes an MG1CS201. In the latter case, we simply do the unlock in-house and you won't need this listing.

Note: what matters is the production date, not the date on your registration document. A car that rolled off the line in May 2020 may not have been registered until months later.

These lists are a snapshot

New control units that we can unlock ourselves are added regularly, and BMW has switched engine computers partway through the same models and model years. So the model and model year alone don't always tell you whether your car needs to be sent out, and these lists can lag behind what's currently possible.

You'll only know for sure once we read out your car at our shop. Then we see exactly which control unit is in there. If it turns out we can do it in-house after all, you're a lot cheaper and faster off with the bench unlock, and we'll make up the difference.

What we do

We carefully remove the DME from your car and ship it out to be unlocked. The pins are small and closely spaced, so removal takes a steady hand. Afterward, we reinstall the unlocked DME and read/write access via OBD is open.

Your car stays safely at our workshop the whole time. Want to keep driving? Rent a loaner car for €35 excl. VAT per day.

What's included

  • The initial read-out, so we know for sure which DME is in there and whether it needs to be shipped out.
  • Removing and reinstalling the DME, both DMEs for the S68.
  • Storage of your car during the process.
  • The unlock itself, after which your car is tunable via bootmod3, MHD, and other OBD platforms.

Coding or tuning your car and a test drive aren't included. You purchase a tune separately from us, see below.

Turnaround time

Plan on about 3 business days. It sometimes takes a bit longer, depending on shipping. We record the shipping arrangements on a form when you drop off your car.

Good to know

  • During the unlock, the DME returns to factory state. If a tune was already on it, that's permanently gone.
  • The S68 (DME9) has two engine computers. Both go along and both are included in the price, so you only need to order this listing once.
  • A dealer update is no problem. The unlock stays intact. Should OBD access drop after such an update, we'll reactivate it.
  • The unlock is safe and doesn't affect factory performance until you have a tune installed yourself.

Tuning afterward

Once your car is unlocked, we can tune it too. With our own software or with a tune from the bootmod3 platform. Check out our ECU tuning or ask about it at your appointment.

How it works

Order the unlock, and we'll get in touch to schedule an appointment with us in Elburg. We read out your car first to see which DME is in there, then take care of everything from A to Z. Questions beforehand? Get in touch, we're happy to help.

How it works

From order to appointment.

01Ordering

You pay for the service in the shop. That way the price is fixed and we don't need to discuss it at the appointment.

02Schedule an appointment

We'll contact you and find a time together. We work by appointment, so there's really time for your car.

03At the workshop

Your car is with us. We check that everything's in good shape before we start any work.

04Walkthrough at pickup

We'll go over what we did together and what to watch for.

Our own workshopEverything in Elburg, no middlemen
Two-year warrantyOn the work we carry out
Explanation afterwardYou'll hear what we did
Score 10Rated via WebwinkelKeur
Monteur aan het werk in de motorruimte
Why Dynoforce ®

The mechanic you talk to is the mechanic who does the work.

Dynoforce ® is a shop with its own workshop in Elburg. We don't outsource anything, so whoever you get on the phone is the same person working on your car.

✓Shop, webshop, and workshop at one address
✓Over 500 customers
✓Score 10 on WebwinkelKeur
✓Two-year warranty on the installation
When can I book a slot?

We work by appointment: Monday to Friday 9:00–17:00 and Saturday 10:00–13:00. After your order, we'll contact you to schedule a time that works for you.

How do I get around while my car is with you?

For short jobs you can wait in our store. If it takes longer, you can rent a loaner car from us: a Toyota Yaris for €42.35 per day. Mention it when we schedule your appointment and it will be ready for you.

Can I combine this with something else?

Yes, that actually works well. For example, have carbon installed and get a wash or coating done right away, in the same appointment.

Reviews

Reviews about this product.

Reviews

What customers say about our workshop.

“Top service. Hele aardige jongens, werd helemaal uitgelegd hoe alles werkt en geven ook goed aan als het niet veilig is voor de auto. Echt heel vertrouwd en blij mee!”
Google review in Dutch, October 2026
“Hij heeft er zelfs voor gezorgd om een mooie oplossing te vinden om nog mooier inbouw eindresultaat te kunnen creëren. Ben hier dan ook zeer content mee.”
Google review in Dutch, 2024

Not sure if this is what you need?

WhatsApp your licence plate and tell us what you want. You'll get an honest answer, even if that answer is that you don't need this.

Dynoforce ®
Uiterwaardenstraat 30
8081 HJ Elburg

0525-796515 · info (at) dynoforce (dot) nl
By appointment: Mon–Fri 9:00–17:00, Sat 10:00–13:00